POLARIS RZR FURY 2.0L / PRO R CAMSHAFTS
BC Brian Crower Polaris Fury Pro-R camshafts are brand new, semi-finished cam cores that allows the capability to grind unlimited lobe specifications while still maintaining the factory base circle size. The Polaris RZR Pro-R Fury, built by ProStar, was just released in the RZR Pro-R chassis and an industry first...a 4 cylinder 2000cc (2.0L) engine featuring dual overhead camshafts (DOHC), solid bucket type cam followers and 4 valves per cylinder. To achieve the 2000cc displacement, the Fury 2.0L features a 93mm cylinder bore x 73.5mm stroke crankshaft with 12.25:1 compression ratio.
Dur @ .050
DROP-IN CAM PROFILE
All purpose level spec, works with factory valve springs. Delivers excellent throttle response out of the turns or wash but still pulls on the straights.
MILD TURBO/SUPERCHARGER PROFILE
Designed for boost levels in the 8 to 20psi range, works well with non-ported cylinder head and stock valve springs. Wider lobe separation & short duration build more cylinder pressure.
DROP-IN HIGH PERFORMANCE CAM PROFILE
More aggressive than the Stage 2 but still works with factory valve springs. Pulls hard up through 9500 rpm but still delivers power on demand on the low end. ECU flash or tune recommended.
NORMALLY ASPIRATED RACE SPECPROFILE
Designed for modified engines, aftermarket pistons with valve reliefs. Requires BC valve spring kit, seals and guides for clearance due to high lift.
BIG BOOST PROFILE
Designed for modified engines above 20psi on a ported head. Big lift, less duration, wide centers to build cylinder pressure. Requires BC valve spring kit, seals and guides for clearance due to high lift.
DUNE/DRAG CAM PROFILE
Big lift and duration spec focuses on top end power. Requires BC spring/retainer kit. Must install BC valve guides for clearance due to big lift. ECU and cylinder head work for optimal gains.
Custom Ground Profile
Special order custom grind to customer's specification
Polaris RZR FURY 2.0L PRO-R (2021-Up)
Bucket Diameter: 31.15mm
POLARIS PRO R TUNING
The above cams require ECU tuning for optimum operation. BC is not a tuning company. Please contact the following companies that offer specific tunes and upgrades for these BC camshafts.
firstname.lastname@example.org - Torque Link
email@example.com - HP Tuners / PowerVision
firstname.lastname@example.org - HP Tuners
WARNING: This product can expose you to chemicals,
including Chromium (hexavalent compounds), lead and lead
compounds, which are known to the State of California to
cause cancer, birth defects or other reproductive harm. For
more information, visit www.p65warnings.ca.gov